Defence and the Defence industry can find the organisations with the right capability by searching below.

Approved
Address1: 1/48 Racecourse Road
Phone Number: 4932 0111
Description:

About the Company

Initially, the core activity was to be the repair of hydraulic and lubrication equipment and purpose designed software was developed in-house, to track the ‘root cause of failure’ to provide a key maintenance management tool. However, this tool also identified the potential for new products and R&D once again became the core activity and the cycle recommenced. Within 12-months a problem with shuttle car hydraulics had been revealed and a new product know as the KIS system was designed and developed and remains in high demand today. This was followed by other new products including Cable-Safe for vehicles with trailing cables, Easilube to provide protection for bearings on mobile machinery, Reel-Safe for shuttle cars and Enviro-Spray for mining water trucks.

Export potential is currently being explored by the company.

Capabilities

Hyden Engineering,supports the mining, earthmoving and agriculture markets with robust automatic lubrication and hydraulic systems and intelligent water spraying systems.

Products

  • Easilube automatic lubrication
  • Shuttle car hydraulics
  • Enviro- spray water truck spray systems 

Markets

Hyden Engineering, supports the

  • Mining,
  • Earthmoving
  • Agriculture markets  

Market Differentiator

Our vision is to provide through innovation the most elegant, robust and environmentally friendly solution to technical problems on a global scale.  

Approved
E-mail Address: ian.dick@idass.com.au
Phone Number: 02 4936 6566
Description:

Fax Number:                    02 49366602

Total Number Employees:   2

Approximate Percentage of Business in the Defence & Aerospace Industry Sector: 30

Postal address: PO Box 365
East Maitland NSW 2323

Australian Business Number:          92091966844

Additional contacts:

Julie Alterator
P: 02 49366566

E: juliealterator@idass.com.au

Primary Capability Summary

Design, Manufacture, testing, Supply, installation, commissioning, training, documentation and support of satellite antenna tracking and control systems, monitoring systems. Defence consultant in many areas of Defence.

Product Description

TS2010 and TS3020 Tracking and Control systems including motor control systems and position feedback systems for all types, sizes of Ku and C Band antennas.

Markets

  • Land                     
  • Aerospace
  • Maritime
  • Information Technology/ Command Control and Communications

Capabilities

  • Research and Development
  • Design
  • Manufacture
  • Sub/ System Final Assembly & Test
  • Software Development
  • Through Life Support
  • Documentation

Market Differentiator

Only Australian developer, designer and manufacturer of satellite antenna tracking and control systems.

Quality Management System

ISO 9000 Compliant but not third party certified

Approved
Address1: 14 Henry Street
E-mail Address: samantha@getudigital.com
Phone Number: 49636465
Description:

Total Number Employees: 9

ABN: 28116160797

The company is supplying to Mining, Power, Rail and Construction industries.

Primary Capability

Established in 2005, ACM Engineering Services Pty Ltd has been providing engineering services to the Mining, Power, Rail and Construction sectors. They provide professional & innovative solutions across the following areas:

  • Project Management
  • Project Coordination & Supervision
  • Procurement
  • Mechanical Design & Engineering
  • Metal Fabrication
  • Hydraulic repair and installation
  • Site Installation & Refurbishment

The business expanded into a workshop facility conveniently located between Sydney and Newcastle, at Morisset in 2012.

Product Description

  • Mechanical Design & Engineering
  • Metal Fabrication
  • Hydraulic repair and installation
  • Site Installation & Refurbishment

Markets

Land

Maritime

Capabilities

Design

Manufacture

Market Differentiator

From project inception to closure ACM Engineering Services will manage all aspects such as design, procurement, manufacture, installation, commissioning, manuals and procedures. Having the expertise of these services under one roof ensures cost, timeframe and scope constraints are met on project requirements. The team at ACM Engineering Services, draws on a vast experience from our members own work experiences from mining, defence, heavy machinery, rail, government and education departments Innovative solutions that have been recognised by clients.

Quality Management System

In House Quality System

Attachments

Quad Chart

Approved
Address1: Building 17, RAAF Base
E-mail Address: info@radarnews.com.au
Phone Number: 4034 7656
Description:

Total Number Employees: 4

ABN: 82142985448

Postal address:

PO Box 89
WILLIAMTOWN RAAF
NSW
2314
 

Approximate Percentage of Business in the Defence & Aerospace Industry Sector: 85%

The company is currently supplying to Defence and Defence industry.
 

Primary Capability

Publisher of a variety of specialist magazines and event programs, with a particular focus on supporting the Australian Defence Force, through a variety of event programs and specialist handbooks.

Product Description

Our products include Port Stephens monthly magazine Radar News, the Welcome to Williamtown and Welcome to Richmond annual handbooks, and event souvenir publications, including programs for Williamtown Air Show, Pearce (Perth) Air Show, Royal Military College Duntroon Centenary.

Markets

Information Technology/ Command Control and Communications

Specialist Publisher

Capabilities

Communications and Print Media

Market Differentiator

Market leader in specialist publications relating to the Defence Force, particularly in the Hunter region. 18 years experience in working with Defence and the local community to produce Fighter Force News (now Radar News), and a host of handbooks and specialist publications.

Quality Management System

In House Quality System

 

Approved
Address1: Level 3, 251 Wharf Road
Suburb: Newcastle
E-mail Address: kraymond@icnnsw.org.au
Phone Number: 02 4908 7390
Description:

Primary Capability Summary

Provide our regional consultancy activities. Our consultants provide solutions to specific local enquiries, as well as representing local manufacturers in all major projects in which ICN is involved. ICN welcomes registration and enquiries from ALL manufacturers, regardless of company size or product speciality.  

Product Description

  • Australian Industry Participation Plan Development
  • Secondment of consultants to Major Projects
  • Supply chain option enquiries
  • Local sourcing enquiries for project proponents
  • Registration of the capabilities of Australian and New Zealand producers
  • Local sourcing of components and services for product development
  • Enhanced Project By Law Services
  • Tariff Concession Enquiries
  • Overseas Project Facilitation  

Markets

NSW & Australian Industry 

Capabilities

ICN bridges the information gap between buyers and sellers by advising on

  • Supply chain development
  • Import replacement
  • Local industry capability and capacity 
Approved
Address1: Suit 5, 710 Hunter Street
E-mail Address: germeen@innovasys.com.au
Phone Number: 4926 0000
Description:

Primary Capability Summary

Test program set development- Automated test routines designed to assist the test and repair of electronic modules.

Power Off testing- diagnostics designed to detect and isolate faults to the component level. Power Go/No- Go testing can be supplemented to reduce total test asset costs.

Test & repair- IPC J-STD-001 certified technicians perform repairs on multi- layered PCBs

Design & Assembly- custom electronic modules, interfaces, adaptors and leadsets.

Through life support- Development of maintenance plans, obsolescence reviews and selection, procurement and maintenance of Automatic test Equipment.

The company is a defence recognised supplier and is a participant in the Defence Industrial Security Program. Associated with:

  • Defence Recognised Supplier Scheme
  • Australian Industry & Defence Network

Product Description

  • AN/USM-717 Virtual Instrument Portable Equipment Repair/Tester (VIPER/T)
  • ATACTS- Autonmated (ATS3000A)
  • ATACTS- Portable (ATS3000P)
  • JTS1000 JTAG Boundary Scan
  • AURORA VTS-1000 Series

  Markets

Industry & Defence 

Quality Management System

The Quality System is designed to achieve consistency and uniformity of services and is certified as meeting the requirements of ISO 9001:2008 by SAI Global Assurance Services 

Approved
Phone Number: 02 49 431175
Approved
Address1: 4-24 Verulam Road
E-mail Address: trevor@jarvie.com.au
Phone Number: 02 4941 1000
Description:

Primary Capability Summary

Founded in Newcastle in 1952 by Bruce Jarvie, the company was originally a general repetition engineering workshop. Over the years staff levels have increased to over 125 people, staff skills have been upgraded, and new technologies have been adopted in response to customers' changing engineering needs both in Australia and overseas.

All stages of repair and manufacture are controlled in-house from cleaning and stripping items, machining, welding and fitting of parts, hard chrome platingor laser surfacing of wear parts, to final assembly and testing of the finished product. With the help of qualified, experienced and long term staff Jarvie provides exacting customer service, technical support and quality assured products. To respond to the changes in industry needs, Jarvie invests in ongoing research and development including re-engineering of existing product design. Jarvie innovations based about 60 years of industry experience have led to process improvements and enhancement to product quality. 

Product Description

  • Engineering Services
  • Hydraulics
  • Machine shop
  • Mechanical Overhauls
  • Laser Metal Cladding
  • Fluid Power 

Markets

Jarvie provides comprehensive rebuild and overhaul services for a range of mining equipment and vehicles, industrial and agricultural equipment.
An extensive range of Fluid Power Systems and products supplements the manufacturing services on offer.

Jarvie has an enviable track record in servicing underground and open-cut coal mining clients.  

Quality Management System

Certified System Quality ISO 9001 

Approved
Address1: Lot 3, Birraba Ave
E-mail Address: wayneb@jrt.com.au
Phone Number: 02 4940 8077
Description:

Additional Contact:

Andrew Morgan

Tel: 02 9737 9340

Fax: 02 9647 1600

ABN: 59 011 009 064

Total Employees: 250

Approximate Percentage of Business in the Defence Industry Sector: 2 %

Company is supplies to Defence and Defence industry, and is a Defence Recognised Supplier

Markets

  • Land
  • Aerospace
  • Maritime
  • Information Technology/ Command Control and Communications
  • Manufacture 

Quality Management System

Third Party certified to ISO 9001

Approved
Address1: Unit 5, 305 Manns Road
Phone Number: 02 8084 9854
Description:

ABN: 23097222565

Number of Employees: 3

About the Company

Approximatly 20% of Kayaking World  business is in the defence and aerospace industry sector. Also being a defence recognised supplier.

Primary Capabilities

Importer and supplier of folding kayaks and inflatable boats kayaks

Sectors

  • Maritime
  • Through life support

Market Differentiator

Supplier of speciallised equipment to special forces.

Quality Management System

No documented Quality/ Business System is in place

Approved
Address1: Level 3, 23 Watt St
E-mail Address: cscott@korr.com.au
Phone Number: (02) 49294528
Description:

About the Company

Korr People specialise in providing contacting and recruitment services to the aviation industry. Korr have an experienced contract engineering team available to complete heavy maintenance, line maintenance and specific projects under our clients certificate of approval. The company currently employees 5 people with approximatly 90% of business in the defence and aerospace industry sector

Product Description

Project management and contract engineering services including licensed aircraft maintenance engineers; trade certified engineers; structures personnel for fixed wing and rotaty modifications, repairs and rebuilds; materials, logistics and stores personnel experienced in purchasing and inventory management. Korr People's aviation recruitment s ervices include executive appointments for airlines and other aviation businesses; heads of departments including engineering and maintenance, flight op's, safety, quality, finance and ground services; engineering and maintenance staff; flight crew; quality auditors. 

Market Differentiator

Korr People have the ability to provide holistic solutions from sourcing, purchasing, leasing and delivery of fixed wing and rotary aircraft to the provision of flight and ground crew, comprehensive maintenance services and full training. Korr People offer vast experience across all areas of aviation including executive positions, engineering management, sales, accounting and flight operations. This gives Korr a clear advantage over its competitors. 

The company use an In House Quality Management System

Approved
Address1: Unit 25, 235 Darby Street
E-mail Address: trapley@labourco.com.au
Phone Number: 02 4910 0131
Description:

Additional contacts:

Mark Symes, Business Development
E: msymes@labourco.com.au

Primary Capability Summary

Training & Development company. Employing more than 1000 casuals have gained full-time work through our subsidiary Labourco at no cost to our clients. Labourco’s philosophy is to provide our clients with the widest selection of skilled staff available, in a safe and equitable environment. 

Product & Service Discription

Labour Co-operative Group is a not-for-profit, self funded, co-operative providing:

  • Labour Hire & Recruitment
  • Pre-employment Health and Functional Assessments Services
  • Drug Screening
  •  Training

Sector

Labour Co-operative Group client industry categories include:

  • Local Government
  • Civil Construction
  • Trades
  • Rail
  • Process
  • Distribution
  • Manufacturing
  • Administration
  • High Schools 
Approved
Address1: 14 William Street
E-mail Address: sales@leert.com.au
Phone Number: 02 4987 4909
Description:

Primary Capability Summary

Leading Edge Electronics is a Home Consumer and  Electronics store, offering correct advice and friendly service and great value prices.The business is part of one of the largest retail buying groups in Australia with over 1,300 stores which enables us to provide quality products at a competitive price. Leading Edge Group is a privately owned Australian company. The business has been privatly owned in Ramond Terrace for the past 10 years. 

Product & Service Discription

  • Camera & Accessories
  • Car Audio
  • Computer & office equipment
  • Electronics
  • GPS & navigation
  • Home & Business phones
  • Home & security
  • Mobiles phones accessories
  • MP3 & Audio
  • Party lights & equipment
  • Radio communications
  • Solar & wind power
  • Toys & learning
  • TV & Video 

Market

Electronics

 

Leading Edge Electronics is a Home Consumer and  Electronics store, offering correct advice and friendly service and great value prices.The business is part of one of the largest retail buying groups in Australia with over 1,300 stores which enables us to provide quality products at a competitive price. Leading Edge Group is a privately owned Australian company. The business has been privatly owned in Ramond Terrace for the past 10 years. 

 

Approved
Address1: 2/4 Birraba Avenue
Phone Number: 02 4033 6600
Description:

Additional contacts:

Dusko Bajic, NSW Engineering Hunter Region Manager
E: dusko.bajic@abigroup.com.au

About Abigroup

As a top-tier contractor Abigroup has the strength, expertise and ability to complete the most demanding projects. But there is one key strength differentiating Abigroup form its peers.

We are a hands-on contractor.
We always have been.

While others reply on sub-contractors for all aspects of an engineering project, Abigroup employs its own teams and boast the largest blue collar workforce in the construction industry.

The benefit of this for clients is that Abigroup retains control over quality, delivery, cost and timing of our projects, ensuring clients are provided the high quality end result they expect – on time, every time.

Our building projects also benefit from our commitment to being a first principles builder that maintains strong relationships and tight program control for the duration of any works undertaken.

Being hands on requires that our project teams are supported and Abigroup is proud to boast a strong culture of encouraging and rewarding innovation at all levels; precast facilities for manufacturing concrete components, accredited training facilities; and a fleet of world class construction and mining machinery.
 

Abigroup Divisions

Abigroup Engineering

Abigroup has been responsible for delivering some of the country’s largest, most ambitious and most highly applauded engineering projects across diverse areas ranging from roads, bridges and tunnels to energy, industry and rail works.
Combining our strong engineering history, innovative culture and extensive plant fleet with a supportive corporate structure, Abigroup’s hands-on engineering teams are well equipped and committed to achieving engineering excellence on all projects.

Abigroup Building

Abigroup’s building teams are structured to provide clients with a complete service from financing, approvals, planning and design through to construction, integrated fit-out and commissioning. With expertise ranging from ecologically sustainable development and whole of life analysis through to project management and quality assurance, Abigroup’s building teams provide a cost-effective and focused edge through a strong collaborative approach.

Abigroup Building

Abigroup Water is a complete water infrastructure service with the following integrated capabilities: 

  • Mechanical, Electrical, Civil & Engineering Turnkey Solutions
  • Commissioning and Operations Management
  • Water & Wastewater Treatment Infrastructure
  • Water Recycling & Purification
  • Desalination
  • Irrigation
  • Bulk Water Transmission & Network Disrtibution

Abigroup Telco & Energy

Abigroup Telco & Energy is a national turnkey infrastructure supplier in the telecommunication and energy sectors. We have assembled highly specialized teams in wireline and wireless technologies, as well as power generation and renewable energy. Working with Federal and State Governments, government departments, industry leaders, major vendors and suppliers, Abigroup Telco & Energy delivers telecommunication and energy services which connect and power our nation.

Abigroup Mining Services

Abigroup Mining Services, with access to the broad capabilities within Abigroup, is able to self-perform all components of a surface mining operation and offer clients a total turnkey solution from design and construction through to ore extraction and processing. It is this value proposition that distinguishes the business from other contractors in the market.
The ability to self-perform all mining-related services enables the company to retain greater control over a project’s critical path and not only rationalize costs through efficiencies but also to provide improved certainty over delivery. 

Abigroup Plant & Equipment

Abigroup distinguishes itself from its competitors by owning, operating and maintaining its own extensive earthmoving fleet. With a large fleet, Abigroup establishes greater control and flexibility over delivery of its projects’ earthworks. 


 

Approved
Address1: 44 Parker Street
E-mail Address: johnw@lovells.com.au
Phone Number: 02 4969 7588
Description:

Additional contacts:

Simon Crane, Director
E: simonc@lovells.com.au

 

Primary Capability Summary

Lovells create suspension components that are exported are all over the world, leading the way in quality, technical co-operation and customer service.

From intercity express passenger trains to rugged mining vehicles and freight locomotives, our suspension products keep them all rolling on time.

Wiring compenents, harnesses and boards for passenger cars, agricultural equipment, Lovells have the experience to supply your suspension spring needs. 

Product & Service Description

The unique Lovell manufacturing range covers every spring from monsters for 200 tonne locomotives made from 56mm high tensile hardened spring steel, to 7mm induction hardened wire springs for a junior Formula car.

It covers automotive springs, springs for passenger and freight wagons and mineral processing shaker springs. We make agricultural springs for scarifers and cultivators 

 

Market

  • Rail
  • Mining
  • Agriculture
  • Military 

 

Approved
Address1: Office2/ 38 Clyde St
E-mail Address: simonc@lovells.com.au
Phone Number: (02) 4969 7588
Approved
Address1: 38 Mitchell Road
E-mail Address: bob@machineshop.com
Phone Number: 49546288
Description:

 

 

About the Company

In February 2009 Machine Shop and Engineering Services acquired its current facility at 38 Mitchell Rd Cardiff and set about assembling Newcastle’s largest CNC machine shop. The development of an extensive and diverse fleet of machinery allows Machine Shop and Engineering Services to successfully tackle engineering jobs of any magnitude. This ability has been reinforced by the recent installation of a second large Mitsubishi 6 axis CNC machining centre at our Cardiff premises.

Capabilities

 

The installation of 2 large Mitsubishi 6 axis CNC machining centers, alongside a diverse fleet of smaller machines, allows Machine Shop and Engineering Services to successfully tackle jobs of any magnitude. We specialize in developing innovative solutions to complex machining problems and are capable of machining hard materials such as Bisalloy, Hardox and Creusabo.

 

 

 

Products

& Services

 

Machine Shop and Engineering Service offers heavy machining manufacture and repair solutions to a wide variety of industries, including mining, defense, recycling, materials handling, hydraulics and construction. 

Approved
Address1: 6 Immarna Road
E-mail Address: emcdonough@macmfg.com.au
Phone Number: 02 4975 3711
Description:

About the Company

Macquarie Manufacturing Pty. Ltd est. 1976 specialises in the design, supply, installation and service support or proprietary line and custom built products and systems.  

Capabilities

Mining

  • Conveyer Transfers
  • Dewatering Systems
  • Longwall Monorail Systems
  • Development Monorail Systems
  • Supplies Monorail Systems
  • Support Products
  • Safety Equipment
  • Storage Equipment
  • Transportation Equipment
  • Ventilation Products
  • General Jobbing
  • QDS Management System

Contract Engineering

  • Plate & Sheet Cutting
  • Steel Section Cutting
  • Robotic Welding
  • Pressing & Rolling
  • Pressure Welding
  • General Fabrication
  • CNC Manual Machining
  • Field Service & Site Maintenance

Manufacturing

  • Keyways
  • Broaching
  • Bisalloy 400
  • Milling Machines (Vertical & Horizontal)
  • Drilling
  • Lathes
  • CNC
  • Beamline Steel Section Processing c/w automated drilling and cutting capabilities (300m x 300mm Capacity)
  • Cad/Cam Profile Plasma/Oxy Cutting c/w automated drilling/tapping turret (14.0m x 3.4m x 100mm cutting capacity)
  • Cad/Cam Design & Drafting
  • Robotic Welding
  • CNC Brake Plate Pressing (6m Bed)
  • Section Pressing
  • G.M.A Welding
  • Plasma Welding
  • T.I.G Welding
  • Spot Welding
  •  Sandblasting & Surface Coating
Approved
Address1: A1-2/77 Munibung Road
E-mail Address: timm@maddisonsafety.com
Phone Number: 02 4954 7544
Description:

Additional contacts:

David davide@maddisonsafety.com

ABN: 25 003 152 743

Dunn & Bradstreet Number:

Total Employees: 30

The company is exporting and supplying to Defence and Defence Industry and is a Defence Recognised supplier. Perecentage of Defence Business 5%

Capability

Supplier of Personal and Site Safety Products. Manufacturer of Bags, Straps, Covers, Belts etc

Product Description

PPE Vending Machines Personal Protective Equipment Leather Belts Canvas and Leather Pouches Webbing Straps Vinyl Covers Heat Resistant Welding Apparel Hi Vis Vests.

Markets

Land                                         

Maritime                                       

Design

Manufacture

Market Differentiator

 Maddison Safety can design and manufacture products to suit our customer’s requirements.        

Quality Management System

In House Quality System Other Standards applied  

Approved
Address1: 1 Pennant Street
Suburb: Cardiff
E-mail Address: ross@maxwelleng.com.au
Phone Number: 49566339
Description:

About the Company

Maxwell Engineering has established itself as one of the Hunter Valleys leading Precision CNC Machining and Precision Fabrication workshops with the capability to supply small to medium sized Components, and supply & assembly complete assemblies or sub-assemblies for larger projects.

Capabilities

CNC Milling

  • 1 x 5 Axis CNC Bed Mill to X=3600 Y=1200 Z=1600
  • 1 x 4 Axis
  • 1 x Multi-Axis CNC Machining Centre, twin chuck, 300Dia x 1000 B.C.
  • 4 x Vertical 4 Axis CNC Machining CentreÕs up to X=2000 Y=1200 Z= 1000

CNC Turning

  • 3 x CNC Turning CentreÕs up to 400mm Dia x 1250 B.C.
  • 1 x CNC Mill Turn 300mm Dia x 1000 BC

Manual Milling

  • 4 x Turret Mill up to 1000 x 600 x 600
  • 1 x Universal Mill 900 x 400 x 300

Manual Lathes

  • 3 x Center Lathes up to 800 dia chucking, 600 dia x 4 mtrs B.C.

Slotting Machines

  • 1 x Slotting Machine 300mm Stroke x 400 Throat

Welding Machines

  • 4 x Trans-mig 400 Amp Welders
  • 2 x Water cooled Tig Mig Units
  • 5 x Lincon 400 Amp Mig Welders
  • 1 x Lincon 500 Amp Sub-arc Machine
  • 1 x Tig-Stick Welding Unit
  • 2 x Portable Tig Welders
  • 3 x Oxy Acetylene Units

Lifting Capacity

  • 1 x 10 Tone Overhead Crane
  • 1 x 3.2 Tone Overhead Crane
  • 3 x 500KG Jib Cranes
  • 3 x 250 KG Jib Cranes
  • 1 x 3.5 Tone Fork Lift Truck
  • 1 x 2.5 Tone Fork Lift Truck

Transport

  • 1 x 6 Tone x 6 Mtre Table Top Trucks
  • 2 x 1 Tone Drop Side Utes

Previous Experience

  • Extensive experience in the manufacture and supply of components for the Rail industry. This includes Passenger Cars, Locos, and in particular Coal Wagon components.
  • Supply of critical components for Defence projects.
  • Supply of components for Re-compression and Hyperbaric Chambers for medical and defence purposes.
  • Manufacture and supply of components for the Mining Industry, in particular components for Mine related Vehicles.

Products & Services

Maxwell Engineering offers an extensive array of services including:

  • Precision CNC machining
  • Precision Fabrications
  • Jobbing work
  • Tig, Mig and Stick welding of Ferrous, Stainless and Aluminum materials.
  • Manufacture and assembly of complete assemblies or sub-assemblies for major projects.
  • Supplier of quality CASTINGS in raw or finished machined condition, ferrous and non-ferrous types.
Approved
Address1: 19 Herbert Street
E-mail Address: office@mckajj.com.au
Phone Number: 02 4945 4111
Description:

 

Mobile Number: 0412 406 939

Total Number Employees: 12

ABN: 21082982330

Postal address:

PO BOX 128

BELMONT

NSW

2280

The company is currently exporting and supplying to Defence and Defence industry.

Primary Capability

McKajj Services offers professional services in Drafting, Engineering & Project Management. A well-developed organisation who has been in the industry for over 15 years, our multi-skilled team delivers innovative service in the Structural, Mechanical & Electrical areas. McKajj Services are equipt with the latest software packages to provide our clients with reliable and competitive services. Our team is our greatest asset, collectively offering over 80 years of qualified specialist experience.

Product Description

·         Drafting

·         Structural Drafting

·         Mechanical Drafting

·         Piping Drafting

·         Electrical Drafting

·         Civil Drafting Engineering

·         Design

·         3D Modelling

·         Detailing

·         Certification Project Management

·         Project & Construction Management

·         Experienced & Qualified Civil/Mechanical and Structural Site Supervisors

Markets

Land

Aerospace

Capabilities

Design

Manufacture

Market Differentiator

McKajj Services specialist and experienced industry professionals deliver attractive and quality services. We utilises the latest computer software and programs:

·         Autocad 3D, 2D

·         Autocad Electrical

·         Inventor

·         Pro steel

·         Solidworks

Having our employees being extensively trained on these programs allows McKajj Services Pty Ltd to meet your needs in the following areas:

·         Concept & Tender drawings

·         Construction & Manufacturing

·         Workshop Fabrication drawings

·         IECEx & AUSEx Scheme (FLP & IP66 Enclosures )

·         Schematics

Quality Management System

In House Quality System

Quality Standards    

All Design & Detail Drafting is completed to the relevant Australian Standards, OH&S requirements, quality assurance & most importantly client's standard.

Approved
Address1: 3 Princess Avenue
E-mail Address: michael@mclean-mc.com.au
Phone Number: 9706 8566
Description:

Total Number Employees: 5

ABN: 93 003 502 510

Approximate Percentage of Business in the Defence & Aerospace Industry Sector: 20%

The company is currently exporting and supplying to Defence and Defence industry.

Primary Capability

Management Consulting and Training

Product Description

  • Armed Services strategic planning, stakeholder engagement and operational improvement programs
  • DMO Defence manufacturing
  • Tiered supply chain improvement programs
  • Maritime
  • Supplier Quality Engineering, Assurance, System and Sustainment
  • Plans System
  • Design and Process
  • Failure Mode and Effects Analysis
  • Problem Solving and Root Cause Analysis
  • Integrated Management Improvement Systems
  • Competitive Systems and Practices
  • Lean and Six
  • Sigma consulting, training and management systems
  • International Supply Chain research and benchmarking

Markets

Land

Aerospace

Maritime

Capabilities

Design

Manufacture

Sub/ System Final Assembly & Test

Through Life Support

Market Differentiator

Successful facilitation of strategic planning, risk and cause analysis systems, drawn from Australian and International best practices and research for supply chains with boards managers and operational defence staff and war fighters through to sustainable implementation.

Quality Management System

ISO 9000 Compliant but not third party certified

Quality Standards    

ISO9004; AS3901; ISO10005; ISO10006;

Attachments

Attachment 1

Attachment 2

Attachment 3

Approved
Address1: 34 Munibung Rd
Phone Number: 02 4954 9200
Description:

About MCM Manufacturing Pty Ltd

MCM Manufacturing Pty Ltd specialise in the manufacture and repair of heat exchangers and pressure vessels. MCM also specialise in medium to heavy fabrications, machining and mechanical overhauls.

Capabilities

MCM Manufacturing Pty Limited has the following facilities:

  • Two fully equipped separate workshops (Totaling 3000m2)
  • Overhead Cranes (up to 20 ton)
  • Self Loading Truck
  • Forklift Trucks
  • Lathes (to 1400 mm Diameter)
  • Mills
  • Borers
  • Radial Drills
  • Automatic Band Saws
  • Power Hack Saws and Friction Saws
  • Gearbox Test Rig
  • Profile Cutting Machine
  • Orbital Tig Welding Machine
  • Manual Tig Welding Machines
  • Mig Welding (including Pulse)
  • Submerged Arc Welding Machines
  • Boom Welders
  • Air Arc Gouging Equipment
  • Welding Positioners (up to 20 ton)
  • Rotators (up to 40 ton)
  • Presses (up to 250 ton)
  • Plasma Cutting Machine
  • Tube Expanding Equipment
  • Pipe Beveling Equipment
  • Hydrostatic Testing Equipment
  •  CAD Facilities  

Products & Services

MCM Manufacturing Pty Limited operates from two fully equipped workshops, using both modern equipment and highly trained permanent employees. 

The following services:
1. Design, Manufacture and Overhaul:

  • Fabrications (Medium to Heavy)
  • Pressure Vessels
  • Heat Exchangers
  • Pressure Piping

2. Other specialised services:

  • Mechanical Overhauls
  • Machining
  • Orbital Welding
  • Weld Reclamation
  • Specialist Welding
  • Industrial Maintenance and Site Work
  • Ship Repair
  •  Boiler Repair
Approved
Address1: 2/22 Ironbark Close
E-mail Address: david@medicmedia.com.au
Phone Number: 02 4967 1111
Description:

ABN- 69498004567 

Registered Company Name- Medic Media Unit Trust Pty Ltd

About the Company

Medic Media is Australia's Premier First Aid, Nursing, Medical, Rescue & Military Training Resource Centre
Medic Media International Pty Ltd provides products, publications and support  across Australia, with strategic alliances across Australia, New Zealand, the USA and the UK.  Established and operated by Experienced Paramedics and working closely with medical professionals across the Paramedical, Nursing and Training industries, Medic Media brings a wealth of experience to its products and services.

The company currently employee 6 employees, with 20% of business being in the Defence & aerospace industry sector. Medic Media is a defence recognised supplier.

 

Capabilities

Healthcare and Military Trauma Care and Simulation Products 

 

Products

Manikins- Nursing care Manikins- CPR Manikins- Infant Crisis Manikins- Airway Management- Airway Heads- Heart and lung sounds- injections and venipuncture- injection arms- intramuscular injection trainers- arterial puncture arms- breast self examination- testicular self examination- dialysis training simulators- central cannulation- central catheterisation- nursing skills trainers- blood pressure- obstetrics and gynaecology- emergency bandage- CAT Tourniquet- defibrillator- defibrillator pads- mankin face shields- CPR prompt- basic buddy- CPR brad- Emergency first aid manual- first aid flip charts- first aid DVD- CPR DVD- The fundamental series- first aid workbook- first aid manual- clinical nurse education tools. 

 

Services

Medic Media aim to source the best products for the needs of the customers. The company either stock the product or refer to our industry partners to ensure the best outcome is achieved. The company work closely with professionals across many industry and education sectors to achieve outstanding outcomes in training the workplace and at home. 

 

Market

  • Land
  • Aerospace
  •  Maritime

 

Market Differentiator

Exclusive NATO trauma care and simulation products  

 

Quality Management System 

Third Party certified to ISO 9001  

Jump to page:
2 3 4 5 6